Tips and Pitfalls: Interop

1. switch back to native mode to restart fcdomain

2. can't use lun zoning, broadcast zoning or zone based QoS

3. FICON and interop modes are mutually exclusive

4. interop 1 doesn't support "zoneset distr v vsan"

5. interop 2 E ports require fcrxbbcredits set to 16 to talk correctly with Brocade switches

6. When using interop mode 4 you must change vsan-wwn to follow the format of: 2y:yy:08:00:88:xx:xx:xx

7. y:yy = the VSAN in hex your working with

8. x = last 3 bytes of actual switch wwn

9. interop 4 offsets domains by 96, so when you configure domain 3, its going to have FCID's of 0x63xxxx.