FICON configuration not saved after reboot

ficon vsan 600 no active equals saved no host control switch offline no host port control portaddress 0x06 name "CH02" prohibit portaddress 0x0a portaddress 0x07 name "CH01" portaddress 0x09 name "CU-STORAGE" prohibit portaddress 0x0a portaddress 0x0a name "CU-TAPE" prohibit portaddress 0x06 prohibit portaddress 0x09 file IPL portaddress 0x06 name "CH02" prohibit portaddress 0x0a portaddress 0x07 name "CH01" portaddress 0x09 name "CU-STORAGE" prohibit portaddress 0x0a portaddress 0x0a name "CU-TAPE" prohibit portaddress 0x06 prohibit portaddress 0x09ficon vsan 601 no active equals saved no snmp port control code-page france no host set-timestamp file IPL file IPL3 Obviously VSAN's 600 and 601 are also setup as in-order-delivery, static domain ID's, default permit zone, fabric binding, etc. As I said, FICON comes up fine once I cut and paste. I have some theories I will be testing to narrow down what causes this situation, and I will update this post with my findings and any bugID's that get assigned.