The Feed

MDS1# show port index-allocation Module index distribution: ------------------------------------------------------+ Slot | Allowed | ...

The RS-1600-FC2 has the ability to hold 16 drives.  These can be configured as a single 16 drive loop, or as two 8 drive loops.  When...

Here is this scenario illustrated: Here is this illustrated:

Configuration is not stored in NVRAM so you must re-configure it after reboot You must zone nport pwwn's involved in SET iSCSI has to be...

Configuration is not stored in NVRAM so you must re-configure it after reboot

0x71 is EPP, 0x77 is CFS fc-tunnel enable must be set for all switches in the path The docs say ip routing must be enabled.  This is not...

You cannot increase the logging level for console past 2 (critical) unless you increase the baud rate to 38400

If you use RDI, persistent domains must be added to fcdomain allowed list Load balancing of IVR NAT traffic across equal cost paths from...

By default FCC is set to 4 which effects only low and medium traffic

Incoming and outgoing CHAP passwords must be different Iscsi import target fc does not apply to iSLB initiators If IVR and iSLB features...

1, 2, 6, 9 slot chassis have 32 ficon ports per slot 13 slot chassis has 16 ficon ports per slot swapping interfaces swaps port numbers...

You cannot use SHA-1 with RADIUS or TACACS+